Recorder Tascam DR-60DMKII

The Tascam DR-60 recorder is a professional solution that allows recording up to 4 channels of sound on SD or SDHC memory cards. Designed specifically for use in DSLR video shooting. It can be mounted on a tripod or directly to the camera. The Tascam DR-60MK2 can record sound at 44.1, 48, and 96kHz quality and with a depth of 16 or 24 bits. Channels 1 and 2 record signals from combined XLR/combo jack inputs, to which external microphones or line signal sources can be connected. Each channel can provide phantom power of 24 or 48V (individually adjustable for each channel). Each channel is also equipped with an overload indicator, and the built-in monitor allows you to control the level of the recorded signal. Individual gain adjustment is also provided for each channel. Additionally, the DR-60MKII recorder is equipped with a 3.5mm stereo input (channels 3 and 4) to which a signal source, such as a stereo microphone or other signal source, can be connected. Channels 3 and 4 are also equipped with an overload indicator and have individual gain adjustment. The recorder is powered by 4 AA batteries, with a runtime of up to 5 hours on one set of batteries. The Tascam DR-60 can also be powered via USB port. The DR-60 is equipped with auto tone and slate tone functions, which facilitate the synchronization process of video during editing. Auto tones can be added at the beginning and end of each recording or when the button is pressed. The auto tone signal is also sent to the device's 3.5 mm output and can be recorded by your camera.

Features:

• Digital recorder for DSLR
• Simultaneous recording of up to 4 tracks/channels.
• Recording on SD / SDHC cards (up to 32 GB).
• Recording format: 16/24 bit, 44.1/48/96 kHz (WAV / BWF).
• Recording mode: MONO, STEREO, DUAL MONO, DUAL ST, 4CH.
• 2 original HDDA microphone preamps from TASCAM.
• 4 input channels: 2 combo XLR/TRS (channels 1/L and 2/R), 1 mini-jack input (channels 3-4)

- For channels 1/L and 2/R, there is a choice of signal source microphone or line, phantom power supply (24/48 V).
- Channel 3-4 has the ability to provide plug-in power (for powering lavalier microphones, etc.)
- All inputs (1/L, 2/R, and 3-4) have separate recording level controls and LED overload indicators

• Monitoring sound output from the camera.
• Independent LINE OUT and headphone output.
• Internal mixer: pan and level controls, low-cut filter (40/80/120 Hz) and limiter.
• LCD display (128×64 pixels) with backlight.
• Tripod mount (bottom) and screw mount for DSLR (top).
• Powered by 4 AA batteries, AC adapter (sold separately), or USB bus.
• Special connector for remote control — for wired remote control RC-10 or pedal RC-3F (sold separately).