Card Yamaha DANTE-MY16-AUD

Yamaha DANTE-MY16-AUD

16-channel Dante input-output network card

The Dante-MY16-AUD card is a fully compatible standard Yamaha Mini-YGDAI card that instantly connects your Yamaha mixer, processor, or power amplifier to Dante. Each Dante-MY16-AUD provides 16 bidirectional audio channels (8 at 96 kHz) and full redundancy of Dante network sound via Gigabit Ethernet.

*Please note that when using the HA Remote feature, both Dante-MY16-AUD (V3.3.9.2 or later) and Dante Controller (V3.2.9 or later) are required.

Main features

24-bit resolution, 16-in/16-out Dante interface (8-in/8-out at 96 kHz)
2x RJ-45 connectors for Dante I/O, 1x 9-pin D-sub connector for RS232-C
Latency can be selected from four preset values: 0.15 ms, 0.5 ms, 1.0 ms, or 5.0 ms
More than 16 audio channels can be transmitted when used with a standard network switch
Automatic detection and configuration of network devices. Device names can be specified as needed
Allows direct audio input and output from PC or Mac without the need for an audio interface
Technical specifications

Number of channels
16IN / 16OUT
Sampling frequency
48 kHz and 96 kHz
Bit depth
24 bits
Network
2 Gigabit (1000 Mbps; 1 Gbps) Ethernet RJ45 connectors
Redundancy
Seamless Dante sound redundancy using two Ethernet networks
HA Remote
Supported on Yamaha products with HA Remote support
Expandability
Install up to four Dante-MY16-AUD cards in available Mini-YGDAI compatible slots for up to 64 bidirectional audio channels
Frequency
High-quality built-in VCXO clock generator can provide master clock frequency OR slave clock frequency for audio equipment; automatic synchronization with the Dante network