Studio reamper Radial Reamp JCR

Studio Reamper RADIAL REAMP JCR

RADIAL REAMP JCR - studio reamper, line signal converter, inputs/outputs: 1 x 1/4" TRS input, 1 x XLR input, 1 x 1/4" unbalanced output, allows you to take recorded tracks and re-record them through guitar or bass amplifiers, dimensions (L x W x D): 84 x 127 x 48 mm, weight: 600 g.

Main features of RADIAL REAMP JCR:
- allows re-recording tracks through a guitar or bass amplifier
- original Reamp® design developed by John Cuniberti
- “Plug & Play” - ease of use
- 100% passive design, does not require a power source
- level control for signal matching
- isolated transformer to eliminate ground loops
- Phase switch, plus a three-position Filter switch

Reamp JCR is a studio passive reamper that allows you to take previously recorded tracks and re-record them through guitar or bass amplifiers.
Radial Reamp JCR is the latest version of the original passive reamper, designed based on the original circuit by John Cuniberti. This model features separate XLR and 1/4" TRS input connectors, a level control, plus a three-position Filter switch with three modes: “taming” excessive peaks, “warming” lows, and a bypass mode that allows you to return to the original circuit if desired. It also includes a built-in Mute function to disconnect the signal going to the amplifier.

Special attention has been paid to ensure that the sound and performance match the original. The heart of Reamp JCR is a custom audio transformer, patented by John Cuniberti, enclosed in a fully 100% passive design. Key characteristics are, of course, the frequency curve and phase response.

Like all Radial products, the JCR features a signature non-slip base that protects the interface from mechanical vibrations.

Reamping
Send a dry track from your recording system through the Reamp JCR to a guitar or bass amplifier. Adjust the tone and move the microphone until you achieve the desired sound.

Adding Pedals
Take another step forward by adding effect pedals to the mix, such as a wah pedal; envelope or distortion. Let your imagination run wild!

Technical specifications of RADIAL REAMP JCR:
Audio chain type: passive, isolated transformer
Frequency range: 20 Hz ~ 20 kHz (+ 0 dB / - 1dB)
Dynamic range: 140 dB
Total harmonic distortion: 0.001% at 1 kHz / 0 dBu input
Intermodulation distortion: 0.0025% at 1 kHz / -10 dB input
Phase deviation: 2° at 100 Hz; 0° at 800 Hz
Input impedance: 1800 Ohm
Output impedance: 4.8 kOhm
Common Mode Rejection Ratio: - 55 dB at 55 Hz
Noise: - 115 dBu
Maximum input signal: +26 dBu
180° reverse polarity, Ground lift, HPF, LPF, level control
Input connectors: 1/4" TRS, XLR
Output connectors: 1 x 1/4" unbalanced
Construction: steel chassis, 14 gauge
Dimensions (L x W x D): 84 x 127 x 48 mm
Weight: 600 g
Power: passive, does not require a power source
Operating conditions: dry rooms at temperatures only between 5°C and 40°C